OverviewThe GEPRC TAKER H70_96K 4-in-1 ESC is a high-powered, reliable ESC solution built for demanding FPV drone setups, supporting up to 70A continuous and 80A burst current on 36S LiPo. Running BLHeli_32 firmware, it supports PWM frequencies from 24K to
The GEPRC TAKER H70_96K 4-in-1 ESC is a high-powered, reliable ESC solution built for demanding FPV drone setups, supporting up to 70A continuous and 80A burst current on 36S LiPo. Running BLHeli_32 firmware, it supports PWM frequencies from 24K to 96K, ensuring smooth throttle response and cooler motor operation. With DShot150/300/600 protocol compatibility, integrated current sensor, and a compact 30.530.5mm mounting pattern, this ESC is perfect for high-thrust 57 inch freestyle and long-range builds.
| Parameter | Details |
|---|---|
| Model | GEPRC TAKER H70_96K BL32 4IN1 ESC |
| Input Voltage | 36S LiPo |
| Continuous Current | 70A |
| Burst Current | 80A (5 seconds) |
| PWM Frequency | 24KHz 96KHz |
| Protocol Support | DShot150 / DShot300 / DShot600 |
| Current Sensor (Galvanometer) | Supported |
| Firmware Target | GEPRC_G071_4IN1_96K |
| Size | 42.6 42.1 mm |
| Mounting Hole Pattern | 30.5 30.5 mm (4 mm holes, 3 mm with grommets) |
| Weight | 12.8g |
70A continuous / 80A burst current output for high-power FPV builds
BLHeli_32 firmware with 24K96K PWM refresh rate for smooth and efficient motor control
Supports 36S LiPo batteries, suitable for mid to heavy-lift drone setups
Integrated current sensor for accurate real-time monitoring
Compatible with DShot150, 300, 600 digital ESC protocols
30.530.5mm mounting pattern, compatible with most standard frames
Lightweight design at only 12.8g, with silicone grommets included
1 GEPRC TAKER H70_96K 4-in-1 ESC
1 Capacitor
1 Flight Controller Adapter Cable
1 XT60 Power Cable
4 Silicone Grommets
rcdrone.top. All rights reserved.
Reviews
There are no reviews yet.