SPECIFICATIONS

Use: Vehicles & Remote Control Toys

Upgrade Parts/Accessories: Frame

Tool Supplies: Grinded

Technical parameters: Value 3

Remote Control Peripherals/Devices: Receivers

Recommend Age: 7-12y,12+y,18+

RC Parts & Accs: Transmitters

Quantity: 1 pcs

Origin: Mainland China

Model Number: FLYSKY FS-i6

Material: Composite Material

Four-wheel Drive Attributes: Slot

For Vehicle Type: Airplanes

Brand Name: Readytosky

Brand Name: FlySkyItem Name: FS-i6 transmitterChannel: 6Model Type: fixed wing/helicopter/gliderChannel resolution: 1024 stepsLow voltage warning: less than 4.2vANT length: 26 x 2mm( dual antenna)Weight: 392gBattery: 6v 1.5AA x 4(not included)eSize: 174 x 89 x 190 mmColor: blackCertificate: CE ,FCCRF specification:RF Range: 2.405 – 2.475GHzBandwidth: 500khzRF Power: less than 20dBmRF mode: AFHDS 2AModulation type: GFSKRX Sensibility: -105dBmReceiver specification:Channel: 6Model type: fixed wing/helicopter/gliderRF receiver sensitivity: -105dBmModulation: GFSKSystem type: AFHDS2A/AFHDSChannel resolution: 1024 stepsBind port: yesPower port: yes( VCC)Power: 4V -6.5V DCWeight: 6.4gAntenna lenght: 26mmSize: 40.4 x 21.1 x 7.35 mmCertificate: CE ,FCCFeatures:Works in the frequency range of 2.405 to 2.475GHz.This band has been divided into 142 independent channels,each radio system uses 16 different channels and 160 different types of hopping algorithm.Silm design on transmitter for easy handling!This radio system uses a high gain and high quality multi directional antenna,it covers the whole frequency band. Associated with a high sensitivity receiver,this radio system guarantees a jamming free long range radio transmissionEach transmitter has a unique ID,when binding with a receiver,the receiver saves that unique ID and can accepts only data from the unique transmitter.this avoids picking another transmitter signal and dramatically increase interference immunity and safety.This radio system uses low power electronic components and sensitive receiver chip.The RF modulation uses intermittent signal thus reducing even more power consumption.AFHDS2A system has the automatic identification function,which can switch automatically current mode between single-way communication mode and two-way communication mode according to the customer needs.AFHDS2A has built-in multiple channel coding and error-correction,which improve the stability of the communication,reduce the error ratio and extend the reliable transmission distance.FS-iA6B Specifications:

Item Name: FS-iA6B
Channel: 6
Frequency Range: 2.4055–2.475GHZ
Band Width Number: 140
Transmitting Power:20dBm
RF Receiver Sensitivity: -105dbm
2.4G Mode: The second generation of an enhanced version of the automatic FM digital system
Encoding: GFSK
Antenna Length: 26mm * 2 (dual antenna)
Input Power: 4.0-6.5V DC
Dimension: 47 x 26.2 x 15mm
Weight: 14.9g
Package Weight
Color: Black
i-Bus Interface: Yes
Data Acquisition Interface: Yes
Model Type: Airplane / Glider / Helicopter
Compatible Transmitter: Compatible with FS-i4,FS-i6,FS-i10,FS-GT2E,FS-GT2G

Features:
Works in the frequency range of 2.405 to 2.475GHz.This band has been divided into 142 independent channels,each radio system uses 16 different channels and 160 different types of hopping algorithm.

This radio system uses a high gain and high quality multi directional antenna,it covers the whole frequency band. Associated with a high sensitivity receiver,this radio system guarantees a jamming free long range radio transmission

Each transmitter has a unique ID,when binding with a receiver,the receiver saves that unique ID and can accepts only data from the unique transmitter.this avoids picking another transmitter signal and dramatically increase interference immunity and safety.

This radio system uses low power electronic components and sensitive receiver chip.The RF modulation uses intermittent signal thus reducing even more power consumption.

AFHDS2A system has the automatic identification function,which can switch automatically current mode between single-way communication mode and two-way communication mode according to the customer needs.

AFHDS2A has built-in multiple channel coding and error-correction,which improve the stability of the communication,reduce the error ratio and extend the reliable transmission distance.

FS-iA6Specifications:
Channels: 6
Frequency Range :2.4-2 .48 GHz
Number of Band: 140
Transmitting Power: not more than 20dBm
Receiver Sensitivity:-105dBm
2.4G modes: Automatic frequency second generation digital systems
Encoding: GFSK
Weight: 6.4g
Input Power :4.0-6 .5 V DC
Dimensions: 40.4 x 21.1 x 7.35 mm
Color: Black
i-BUS Interface: No
Data Acquisition Interface: No
Certification: CE0678,FCC
Usage: Suitable for RC Airplane / glider / helicopter
Compatible Transmitter: Flysky FS-i10,FS-i6,FS-i4,FS-GT2F,FS-GT2E,FS-GT2BFS-iA10B ReceiverSpecifications:Brand Name: FlyskyItem Name: FS-iA10B
Channel: 10
2.4G Mode: The second generation of an enhanced version of the automatic FM digital system
Antenna Length: 26mm * 2 (dual antenna)
Input Power: 4.0-6.5V DC
Weight: 19.3g
Size: 51mm*34mm*15mm
Color: Black
i-Bus Interface: Yes
Data Acquisition Interface: Yes
Model Type: Airplane / Glider / Helicopter
Compatible Transmitter: Compatible with FS-i4, FS-i6,FS-i6S, FS-i10,FS-iT4S

FS-A8SSpecifications:
Channels: PPM 8CH, i-BUS 18CH
Model type: Multi-rotor
Frequency range: 2.408-2.475GHz
Band width: 500KHz
Band number: 135
RX Sensitivity: -92 dBm
2.4GHz system: AFHDS 2A
Modulation type: GFSK
DSC port: PPM/i-BUS/S.BUS
Transfer method: FHSS
Data output: 1.5mm*3 Pin PPM/i-BUS/S.BUS
Antenna length: 26mm (Not including brass contacts)
Input power supply: 4.0-8.4V
Display method: LED
No ground interference ( Transmitting and receiving 1 m from the ground): >300m
Working current: 40mA
Each channel data: depend on the transmitter
Channel delay: <15mS
Size: 20*14*5.3mm
Weight: 1.2g
Certificate: CE0678, FCCID: N45ZA8S00
Compatible Transmitter: Compatible with FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-GT2E, FS-GT2G, FS-GT2F

FS-X6B Specifications:

Item: X6B i-BUS 2.4GHz 6CH Receiver

Channels: 6(PWM), 8(PPM), 18(i-BUS)Model Type: Multi-RotorRF Range: 2.408-2.475 GHz
Brand Wigth: 500KHz
Number of bands: 135RF Power: No more than 20 dBmRX Sensitivity: -95dBm2.4GHz protocol: AFHDS 2AModulation Type: GFSK
Stick resolution: 1024
Low voltage alarm: Yes
DSC port: PPM/PWM/i-BUS
Antenna Length: 93mm (Dual Antenna)Power input: 4.0-8.4VOn-line Update: Yes(Wireless)
Range: >300mWeight: 4.5gSize: 36*22*7.5mmi-BUS Port: YesCertificate: CE0678, FCC ID: N4ZX6B00
Compitable Transmitter: All AFHDS 2A Transmitter, for example FS-i10 FS-i6,FS-i6S, FS-i6X, FS-i4, FS-i4X
Note: Failsafe only work onPWM, not in PPM or IBUS.

Item name:Flysky FS2A 4CH ReceiverChannels: 4CHOutput signal: PWMFrequency range: 2.408-2.475GHZBand width: 135Receiver sensitivity: -92DBM2.4G mode: AFHDS 2AFailfe: YesSupply voltage: 3.3-10VDistance: 400+ metersWorking current: 20MADimensions: 11 * 25MMWeight: 0.9 gramsModel: Fli14+

Item Name: 2.4G 14CH Compatible Flysky AFHDS-2A Receiver

Channel: 14CHProtocol: AFHDS-2A2.4G Mode: The second generation of an enhanced version of the automatic FM digital systemAntenna Length: 70mm(Dual Antennas)Input Voltage: 4-6.5V DCWeight: Only 1.7gSize: 25x15x5mmColor: BlackSignal Outpu: IBUSRSSI Output: Channel14No ground interference ( Transmitting and receiving 1 m from the ground): more than 500m

Features:
Works in the frequency range of 2.405 to 2.475GHz.This brand has been divided into 142 independent channels,each radio system uses 16 different channels and 160 different types of hopping algorithm.

This radio system uses a high gain and high quality multi directional antenna,it covers the whole frequency brand. Associated with a high sensitivity receiver,this radio system guarantees a jamming free long range radio transmission

Each transmitter has a unique ID,when binding with a receiver,the receiver saves that unique ID and can accepts only data from the unique transmitter.this avoids picking another transmitter signal and dramatically increase interference immunity and safety.

This radio system uses low power electronic components and sensitive receiver chip.The RF modulation uses intermittent signal thus reducing even more power consumption.

AFHDS2A system has the automatic identification function,which can switch automatically current mode between single-way communication mode and two-way communication mode according to the customer needs.

AFHDS2A has built-in multiple channel coding and error-correction,which improve the stability of the communication,reduce the error ratio and extend the reliable transmission distance.

Compatible with all current first-generation (AFHDS) and second-generation (AFHDS 2A) remote controllers of FS (Flysky) (does not support return):FS-GT2 / FS-GT2B / FS-GT2E / FS-GT2F / FS-GT2GFS-GT3B / FS-GT3C / FS-IT4FS-i4 / FS-T4BFS-i6 / FS-i6S / FS-T6 / FS-CT6BFS-i10 / FS-TH9XSignal output supports 6CH PWM and 1 PPMFixed out-of-control protection signal output: CH1, CH2, CH4 -> 1.5mS, CH3 -> 0.9mS, CH5-CH8 hold signals after 1 second after losing the remote control signal*Product specifications:Working voltage: 3.8-6VWorking current: 30mASensitivity: <-92dbmSignal output: 6PWM + 1PPM2.4G mode: AFHDS / AFHDS 2AOutput channel: 6CH(PWM)+8CH(PPM)Weight: 9 gramsDimensions: 45*25mmDistance: 400+ meters*Product use:Coding method:1. Insert the code matching line of the receiver into the code matching port “B” and power on, and the blue light flashes quickly to enter the code matching mode2. Press the code button (Bind button) on the FS (Fouss) remote control to power on and enter the remote control code matching mode3. If the blue light of the receiver flashes quickly and turns off, it means that the code is successfully coded. 4. Turn off the power of the remote control and power it back on to enter the normal mode. The blue light of the receiver is always on. 5. Unsuccessful code matching, repeat 1-4( send as your choice)