2oz water-basedacrylic RC paint.

Airbrush and brush ready.

Made in the USA.

Recommended ratio(using Mission Models Thinner MMA-003) is 1:10 as a starting point, dilute to you personal preference.

Prep:
Adding a couple drops of Polyurethane Mix will make the paint EVEN MORE flexible for better flexible properties.

Cleaning:
Using water to clean up everything. You can use a spray bottle in stream mode(ZEP, any Home Depot sprayer) to clean everything. Use the thinner as a final rinse/wipe. Just a little bit and run it through the air brush after cleaning with water.

MIssion Models FAQ link:
https://missionmodelsus.com/pages/tips-and-tricks-faq